- 1. 托辊传动网带式电阻炉生产线
Continuous Mesh-belt Conveyor & Gas controlled Heat-treatment Furnace
WZ-800A翻斗式送料机 Auto loader(chain lifting) typefeeder
WZ-800B磁带式送料机Magnetic type feeder
WZ-800C振动式送料机 Vibrating type feeder
用途:均匀地运送(小、中、大件)工件至前脱脂洗净槽,使工件均匀进入炉内热处理。
Usage:deliver (small,medium,large)pieces to front degreasing & washing tank ,so that the work piece enter the furnace heat treatment evenly.
WZ-801前脱脂洗净槽Front degreasing & washing tank
用途和特点:
(1) 洗净槽配备加热器,使工件在热水的槽体中浸泡一段时间,然后对行进在输送带的工件进行喷淋,去除附着在工件上的油污。
(2) 洗净槽配备油水分离器和强力吹风装置。
(3) 洗净槽配备喷淋泵浦。
Usage and features:
(1) Equipped with a heater in the tank and work pieces are soaked in the hot water in a while, then spray to remove the dirty while moving in the elevator.
(2) Equipped with an oil-water separator and strong blower.
(3) Equipped with a spraying pump.
WZ-802去磷槽Dephosphating tank
用途:适用于汽车等高强度螺栓的去磷处理。避免表层金相组织发生变化,形成一个渗磷层,这层组织会对产品的疲劳性能等造成影响。
Featrues:For automotive high strength bolts to phosphorus treatment
Avoid surface microstructure changes, forming a phosphor layer infiltration , fatigue properties of this layer of tissue products, such as would affect .
WZ-803连续式网带传动可控气氛热处理淬火(渗碳)炉
Continuous mesh-belt conveyor & gas controlled hardening(carburizing) furnace
用途:广泛使用于工程机械、汽车配件、紧固件、轴承、链条、五金工具和精密件行业等调质渗碳热处理。
特点:
(1)省电:使用高强度的硅酸铝板、陶瓷纤维板、高段热的保温材料,可达电热最高效率。
(2)操作:采用电脑触目屏自动化控制运行操作,节省人力。
(3)品质:采用多段式控制搅拌风机,温度均匀,提高品质。
(4)炉气:采用甲醇滴注式裂解,炉气稳定,确保品质。
(5)稳定性:CP值公差±0.03%(碳浓度),炉温均匀性±5℃
Usage:Widely used for engineering machinery, auto parts, fasteners, bearings, chains, metal tools and precision parts industries quenching carburizing.
Features:
(1)Electricity-saving:adopt high tensile calcium silicate board,
ceramic fiber board, heat-resistant material for high
performance.
(2)Operation:adopt automatic control to save manual cost.
(3)Quality:equipped with a variable step string fan on the top of the
furnace to get uniform temperature for high quality.
(4) Gas:adopt methanol decomposition to stabilize gas and to
ensure for quality.
(5) Stability: CP value tolerance±0.03%(carbon potential),and
temperature equally dispersed at ±5℃.
WZ-804淬火冷却油(水)槽Quenching cooling oil(water) tank
特点:
(1) 采用板式热交换器和诺亚方舟,能迅速地控制及调整油(水)温。
(2)油(水)槽采用循环冷却泵浦,能根据需要调整槽内介质的温度。
(3)槽内配备搅拌机,能使介质温度均匀。
(4)油(水)槽配备过滤网抽换式装置,在作业上不至于因杂物累计而造成泵浦和热交换器堵塞。
Features:
(1)adopt board-type heat exchanger to control rapidly the temperature of oil(water).
(2)Equipped with circulation and cooling pump in the tank so as to adjust the oil(water) temperature according to the requirements of the process of the work piece.
(3)Equipped with a string fan and make the oil (water) temperature uniformity.
(4)Equipped with a filter and dirty can’t be stored in heat exchanger & pumps to lose its cooling function.
WZ-805后脱脂洗净槽Rear degreasing & washing tank
用途和特点:
(4) 洗净槽配备加热器,使工件在热水的槽体中浸泡一段时间,然后对行进在输送带的工件进行喷淋,去除附着在工件上的油污。
(5) 洗净槽配备油水分离器和强力吹风装置。
(6) 洗净槽配备喷淋泵浦。
Usage and features:
(4) Equipped with a heater in the tank and work pieces are soaked in the hot water in a while, then spray to remove the dirty wile moving in the elevator.
(5) Equipped with an oil-water separator and strong blower.
(6) Equipped with a spraying pump.
WZ-806Continuous mesh belt conveyor tempering furnace
特点:
(1) 发热体采用上下排列设计,温度均匀,寿命长,故障率低。
(2) 炉内配有搅拌风机,使炉膛内的温度均匀。
Features:
(1)Heater adopts up-down design to get uniformity temperature and has a long service life and low faulty rate.
(2)Equipped with string fans at the top of the furnace make uniformity temperature and high quality hardness.
WZ-807双层着色槽Double-layer dyeing tank
特点:
(1) 利用回火余热来着色,节约能源。
(2) 利用热交换器调整温度,防止着色槽温度过高。
(3) 着色槽采用双层式,设有循环泵浦,可根据需要任意抽取着色剂。
Features:
(1)Make use of tempering heat for dyeing work piece to save energy.
(2)Adopt high-quality heat exchange to prevent fire caused by overheated oil.
(3)Uses double-layer type dyeing tank with circulation pump, and color of dyeing can be optional.
WZ-808上油装置Oiling device
WZ-809温度自动控制盘Automatic temperature control cabinet