洪顺HSMFS-328/329定型机
Hongshun stener HSMFS-328/329
洪顺设计的HSMFS-328/329 双风道型拉幅定形机适用于各种要求的纺织面料整理，特别是弹性织物和敏感织物的整理。该机型具有高效率，低能耗，独立均匀温度的箱体设计，并赋予织物低的张力。该设备采用了部分进口电器控制设备，如EL公司的横动式对中装置、德国减速器电机以保证产品的稳定性；以及压力传感器、PLC、触摸屏等设备增强人机交互，该设备通用性强，所有天然纤维和人造纤维的机织物、针织物和经编织物均可用该设备处理。设备设定车速5-100 m/min。可以适用于对针织物和机织物的脱水，后整理，烘干，焙烘和热定型。
The type of HSMFS - 328/329 stenter designed by HongShun is double duct, which is suitable for various requirements of textile fabrics, especially elastic fabric and sensitive fabric finishing. The stenter has high efficiency, low energy consumption, independent uniform temperature cabinet design, and gives the tension of fabric is low. The equipment adopts imported electric control equipment, such as EL company traverse type of centering device, the German reducer motor to ensure the stability of the stenter; and pressure sensors, PLC, touch screen devices to enhance human-computer interaction, this equipment versatility, all natural fiber and synthetic fiber woven fabric, knitted fabric and warp knitted fabric processing are available. The device set speed 5-100 m/min. The stenter can be applied to dehydration of knitted and woven fabrics, finishing, drying, baking and heat setting.
主要技术参数
形式：热风循环，单层卧式
车别：右手车（或左手车）
公称宽度（mm）：1800、2000、2200、2400、2600（窄幅系列）
2800、3000、3200、3400、3600（宽幅系列）
调幅范围（mm）：700-1600 700-1800 700-2000 700-2200 700-2400
700-2600 700-2800 700-3000 700-3200 700-3400
公称速度：100m/min（速度范围5－100m/min）
超喂率范围：正超喂30%，负超喂10%
烘房温度：100-230℃
热源 ：载热油，燃气（城市煤气，天然气，水煤气，液化石油气），电，高压蒸汽
持布形式：针铗
落布形式：单摆式或摆、卷两用落布或卷装落布
探边形式：高精度红外探边
导轨形式：无油润滑的钢板导轨或铸铁导轨
烘房节数：4-10节，每节长3m
烘房外形尺寸：（1344+n×3000）mm+（W+1816）mm×1737mm
机器外形尺寸：（16115+n×3000）mm+（W+2500）mm×2300mm
装机功率：（55+n×15）KW（不包括电加热功率）
工艺流程
平幅进布→螺纹扩幅→红外对中→轧车→圆盘整纬→下超喂→机械整纬→螺纹扩幅→上超喂→剥边→红外探边→上针→浆边→拉幅或热定型→冷风冷却→切边、吸边→脱针→摆式落布或小打卷
The main technical parameters
Form: hot air circulation, monolayer horizontal
Cars don\'t: right hand car (or the left hand car)
Nominal width (mm) : 1800, 2000, 2200, 2000, 2200 series (narrow)
2800, 3000, 3200, 3000, 3200 series (wide)
Amplitude modulation range (mm) : 700-1600, 700-1800, 700-2000, 700-2200, 700-700
700-2600, 700-2800, 700-3000, 700-3200, 700-700
The nominal speed: 100 m/min (speed range 5-100 - m/min)
Super scope: feed rate is super fed 30%, 10% negative overfeeding
Drying room temperature: 100-230 ℃
Heat source: heating oil, gas, city gas, natural gas, water gas, liquefied petroleum gas), electricity, high pressure steam
Prod-ucts hold cloth forms: needle
Off forms: single pendulum pendulum, take-up and cloth or cloth package
Delineation forms: high precision infrared delineation
Guide: oil-free lubrication plate conveyor or cast iron rail
Dryer section number: 4-10 section, each section 3 m long
Chamber shape size: (1344 + n + + 1816 (W) x 3000) mm mm x 1737 mm
Machine appearance size: (16115 + n + + 2500 (W) x 3000) mm mm x 2300 mm
Installed power: (55 + n x 15) KW (not including electric heating power)
The process flow
Open-width into cloth - thread enlarge picture - - rolling car - round consolidation in the infrared signature of the weft - overfeeding under - machine on the whole the weft - thread enlarge picture - hello - on the strip edge to infrared delineation, needle - plasma edge - stenter or heat styling to cold wind cooling, trimming, suction side to take off the needle, pendulum fall cloth or small volume
标准轧车
在织物规定幅宽中具有标准的均匀压力，并给予织物极低的张力。
Standard padder
Standard padder has set uniform stress to fabric width, and give the tension of fabric is extremely low.
在主控制台，通过独立驱动的调幅丝杆，可预先设定任何幅宽形态。
In the main console, through independent width adjustment spindle, can be set in advance any width form.
联 系 人：李志光经理
电 话：0595 88981609
移动电话：
传 真：0595 88981609
地 址：中国 福建 石狮市 锦尚镇
邮 编：362700
